您现在的位置:首页 >> 产品分类 >> 扇形段 >> 扇形段部分

  内、外弧框架通过四根导杆及液压缸连接在一起。通过夹紧液压缸缩回杠杆、内外弧框架之间的厚度调整装置来实现内外弧夹紧状态,同时实现内外弧辊之间的间距调整。通过夹辊对带有液芯的铸坯起到支撑和导向作用,使其沿预定的辊道前进,并限制它发生鼓肚变形带来的铸坯缺陷。

  Inner and outer arc frame through four guiderod and hydraulic cylinder together. By clampinghydraulic cylinder retracting lever, the outerarc framework between the thickness of theadjusting device to realize inner outer arcclamping condition, at the same time realize theouter arc roller spacing between adjustment.Through the clamping roller of slab with liquidcore supporting and guiding role, make its alongthe predetermined table, and limit its drum bellydeformation caused by casting defects.

  结构简单、方便调整、能够适应改变铸坯断面的要求,能快速处理事故。

  Simple structure, convenient adjustment, canadapt to changes in the cross section of thecasting requirement, can quickly handle theaccident.

基本参数:

The basic parameters:

  可浇注铸坯的宽度:800 ~ 1250mm

  Can be cast slab width: 800 ~ 1250 mm

  可浇注铸坯的厚度:180mm、200mm、220mm

  Can the thickness of the casting slab: 180 mm, 200 mm and 220 mm

  辊数:7 对/ 段

  Roll number: 7 / segments

  辊径:ф230mm

  The roll diameter: ф 230 mm

  辊子形式:二分节单独辊,辊面宽度

  分别为:454mm、734mm

  Section type: binary single roller, roller surface width: 454 mm and 734 mm

  轴承型号:调心滚子轴承23120C/W33/C5

  Bearing type: spherical roller bearing 23120 c/W33 / C5